PRO3V


PROLESKI PRO3V indoor ski simulator (infinite slopes)

Can be used at fitness centers, sport clubs, entertainment and shopping centers, mountain skiing schools, education and sport establishments.

trenajer-animation-UP-DOWN

Technical characteristics

# Specification dynamic models
series Vertical
PRO3V
1 Recommended number of skiers without including coach, for comfort skiing with the skis with length of 170 sm 3
2 Working length, mm 9000
3 Working width, mm 4650
4 Lifting mechanism type    electric cylinders
5 Inclination angle, ° V: +8° +23°
6 Maximum speed of the moving band basic/option km/h 35
7 Speed of inclination switching, deg./sec. 1,8°/s
8 Speeding up of the inclinationangle switchint is basic and set up to, m/s2 1m/s2
9 Recommended height of the ceiling at the maximum lifting, m 6,7
10 Overall width, mm 5570
11 Overall length (changes connected with the p. 5), mm 10780 .. 11136
12 Height of the upper platform, mm (changes in accordance with p.5) 2350 .. 4625
13 Height of the lover platform, mm 950
14 Width of the mounting spot, not less than 5770
15 Length of the mounting spot, not less than 10880
16 Weight, kg 6000
17 Load distribution and number of bearing plates 3
18 Power consumption (working/max.), kW/h 10/ 46 kW
19 Framework, processing powder painting or zincing
20 Handrails aluminium with wooden plate (beech)
21 Starting plank stainless steel
22 Working covering covering with the pile height 23 mm
23 Lead and driven shafts rubber covered
24 Band stabilization system automatic
25 Gradual speed control +
26 Standing control board +
27 Standing control board Future option
28 Remote control +
29 Ski carpet speed up adjustment option
30 Automatic wetting water feed +
31 Indication panel LCD V km/h, S km, t minutes 19,5″
32 Break unit for quick stop +
33 Zones of automatic break +
34 Protective mat +
35 Safety suspention system option
36 Mirrors stand option
37 Automatic maintenance system option
38 Statistics and billing system PROLESKI option
39 Slopes programming system
40 Ergospirometry system
41 8D Vision System
42 Lubrication concentrate PROLESKI option
43 Function “realness” /speeding up of the inclination angle switching can be regulated up to 10 m/s2 option
44 Qualified training of instructors option
45 Function Transformation –> Direction  option –> Direction
46 Automatic adjustment of the upper platform in horizontal position
47 Walk way for the operator is 800 mm + working place of the operator + additional backup control panel

Standard models of ski simulators PROLESKI have immovable platform angles of the attraction. Model of the endless slope PRO3V is different from the standard variants that special drive can dynamically change vertical tilting angles of the ski simulator to a limited extend, that should be set out at the stage of the engineering.

Such solution allows complicating loadings and attracting larger number of visitors, for whom constant tilt may seem simple. Careful attention during production of the attraction can be paid to the safety questions, especially in such complicated variant, as model of the endless slope PRO3V. In the construction, there is well-considered rails system on the perimeter of the attraction, and also band emergency shut down system in case of the unforeseen circumstances.

Model PRO3V of ski simulator PROLESKI is designed with implementation of the current technological concept, materials of the well-known manufacturers with the international name SKF, ABB, Lenze etc. Covering for sliding of the moving band of the attraction, PROLESKI is produced using special purpose composite materials that are characterized by the perfect sliding criteria and long term of operation without loss of efficiency. Besides that, in the simulator construction there is provided automatic system of the wetting concentrate supply.

Operation monitoring of the endless band operation is carried out with help of the fixed and remote control.